Paper

Coated paper dedicated to cost-effective large format prints. It was developed to be applied in backlit carriers. Paper structure for backlighting and proper weight perfectly disperse light, creating very aesthetic light advertising.
Coated poster paper finished with satin surface and dedicated to print copies, advertising graphics and all types of marketing materials. It is designed for printing with the use of solvent, eco-solvent and UV technologies..
High quality coated chalk overlay paper providing the possibility of double-sided printing with the use of the UV and offset technologies. Thanks to its significant weight, it is applied in the production of posters, leaflets, folders, price strips and wobblers.
Single-side coated graphic solid cardboard. Thanks to its size, it enables printing non-standard products, like theft detector wrappers, overlays on shop shelves, price strips and large format boxes.

Photo wallpapers

Synthetic, smooth, matt paper 212g/m2, coated with latex and recommended in the production of photo wallpapers. It provides intense, deep colours while printing. It does not soak with glue during bonding, thus it is easy to apply on a wall, it does not stretch and it is definitely more tear proof.
A structural PVC wallpaper with matt coating, with a weight ratio of 300 g/m2, resistant to scratches, with paper bottom. Photorealistic quality of print and resistance to scratches. Easily removable.
Coated PVC on the interfacing base. It has ornamental texture and can be applied on walls in the same way as typical wallpapers. Photorealistic quality of print and resistance to scratching. Easily removable. Attested as inflammable, in accordance with DIN 4102 B1.

Self-adhesive films

The PVC film dedicated to outdoor advertisement displayed for short and medium periods. It is used when sticking on flat advertising surfaces without ribs. It can be glossy, matt or transparent. Permanent, removable and grey glues are available. The film provides high quality of print and very good mapping of colours.
The PVC film is applied to outdoor advertisement displayed for long periods. It is characterized by very good resistance parameters related to external factors. The film provides high quality of print and very good mapping of colours. It is available in glossy or matt versions with acrylate or acrylate tubular glue.
White self-adhesive film cast with grey glue for sticking on cars in full 3D (ribs). Thanks to a tubular structure of glue, it provides the possibility to relocate film, while sticking on the car. Great resistance to external conditions, like changes of temperature and UV radiation.
Thanks to its perforated structure, One Way Vision is dedicated to outdoor and indoor applications in windows and glass sheets in public transport vehicles.
Plotted ornamenting film imitating the effect of frosted glass. Designed to be applied in windows and glazing in office premises. Resistant to external conditions.
Monomer PVC film enables easy and fast application without any experts. In case of incorrect sticking, film layout can be corrected without negative impact on the final result. The film contains a special type of glue which prevents the appearance of bubbles while applying. Available in the white glossy or matt version. Attested as inflammable (B1).
Monomer film with removable glue, coated with anti-slippery laminate of rough surface. Intended for sticking on smooth floor surfaces. Laminate is attested as anti-slippery thanks to its structure, it is especially resistant to damage.
Self-adhesive film with a special glue formula, dedicated especially to be applied on carpet flooring. The product is designed for application in short and medium periods, depending on a place of application. Removable acrylic glue, used in the product, is designed exclusively for interiors of buildings.

Banners

PCV banner fabric, laminated, designed to be printed on one side. Laminated banners are mostly applied in short-term expositions, and their durability is estimated to be approximately one year. Depending on a method of installation, we offer suitable finishing methods: welding, eyeleting and orifices.
White, matt, coated PVC fabric with high resistance to external conditions and mechanical damage. Designed to be printed on one side. Very tear proof, resistant to humidity, UV, low and high temperature. It can be thermally welded or glued. We offer suitable finishing methods, depending on a method of installation.
White PVC fabric with a net structure providing free flow of air. Such a structure enables the production of large format nets, significantly reducing the risk of a graphic element being torn by wind. The “mesh” net is dedicated to the production of advertisements located on building facades.
White PVC fabric providing double-sided print. Thanks to the “stoplight” layer, non-translucent and included in its structure, this fabric enables exposition of double-sided print without shining through. Blockout is also used in the production of graphics applied in exhibition systems (roll-up).

Backlight

Polyethylene film dedicated to the production of backlit graphics. Its surface has a translucent structure, thus it disperses light sources after backlighting. The special type of printing provides great intensity of backlit colours. The material is attested as inflammable (B1).
PVC banner dedicated to the production of backlit graphics. Its surface has a translucent structure, thus it perfectly disperses light sources after backlighting. The special type of printing provides great intensity of backlit colours. The material is attested as inflammable (B1).
Polyester fabric coated with a PVC layer, dedicated to the production of backlit graphics. Its surface has a translucent structure, thus it perfectly disperses light sources after backlighting. The special type of printing provides great intensity of backlit colours

Roll-up

High quality polyester film. With the “stoplight” layer, non-translucent and included in its structure, this fabric enables exposition of double-sided print without shining through. Thanks to its thinness, it can be perfectly rolled up in cassettes of exhibition systems, i.e. roll-ups.
White PVC fabric enabling double-sided print. With the “stoplight” layer, non-translucent and included in its structure, this fabric enables exposition of double-sided print without shining through. Blockout is also used in the production of graphics applied in exhibition systems (roll-up).

Fabrics

Polyester fabric for sublimation print providing intense colours and durability to external conditions. Thanks to its lightness and wind permeability, it is dedicated mostly to the production of advertising flags, such as: winders, beach flags and company flags to be hung on masts. It is very light and easily transported.
Polyester fabric for sublimation print providing intense colours. The most frequent application is production of advertising graphics framed in aluminium. Ecological and direct print on the fabric is an additional advantage. Very light and easily transported polyester banner.
Polyester fabric for sublimation print providing a satin, shining structure. It allows for obtaining very intense colours, as well as durability and flexibility. Ecological and direct print on the fabric is an additional advantage. Very light and easily transported satin banner.
Polyester fabric coated with a PVC layer, dedicated to production of backlit graphics. Its surface has a translucent structure, thus it perfectly disperses light sources after backlighting. The special type of printing provides great intensity of backlit colours.
Cotton cloth coated with a PVC layer. Canvas imitates an original painting canvas, thus it is successfully applied in the production of photo pictures, copies and ornamented graphics.

Rigid materials

PVC films are characterized by intense gloss and flat surface. Thanks to considerable chemical resistance, perfect thermoforming and deep drawing features, as well as mechanical processing, films are often used in the production of advertisements. Possible double-sided print.
PP (polypropylene) films are hard films produced in the process of calandering or extrusion. They are characterized by perfect durability, as well as modern and effective look. Great rigidity, various types of surfaces, plenty of colours and easily performed mechanical processing enable various applications of propylene films in the production of advertising items.
PET (polyethylene terephthalate) films belong to semicrystalline thermoplastic materials and they are produced in the process of calandering or extrusion. They are perfectly transparent and are characterized by great gloss and good mechanical properties. This is a perfect printing material.
High Impact Polystyrene is a light, very easily thermoformed material. These features enable deep drawing of sophisticated spatial forms. HIPS is recommended for indoor applications. It is perfect for various products of advertising industry. Possible double-sided print.
Polysteryne rigid foam panel covered with cardboard lining on both sides. Very light. Ideal material for the presentation of artwork, visual projects or as an exhibition item. Possible double-sided print.
Rigid, white and coloured panels made of polyvinyl chloride, produced in the technology of free foaming using the embossing method. The surface of boards is normally matted and they are relatively light thanks to their foamed structure. Possible double-sided print.
Rigid, durable and aesthetic composite panels for various applications, comprising lacquered aluminium layers connected with a polyethylene core. This panel is extremely resistant to layer separation. Alubond is ideal for ornamenting structures requiring flat surface and rigidity.

Magnetic mat

Monomer PVC film, white, glossy or matt with a magnetic base, to be applied on metallized bases enabling easily removable applications on public transport vehicles, in shops (prices), on educational accessories, etc. Dedicated to eco-solvent and UV print.